Unitech MS860 Uživatelský manuál stáhnout pdf (Strana 94)

MS860 WiFi Manual

TROUBLESHOOTING

Problems and Solutions, continued

Open a DOS session (Start / Run / type “cmd”).

Type “ping ##.##.##.##” (replacing # symbols

with your MS860’s actual IP address).

The results should be similar to that below:

If no packets are found, try a few more times.

If the ping “times out” consistently, then the

MS860 is not connected to the network and you

need to start your setup over.

If 1 to 3 packets are received, then you are too far

from the Access Point and have a weak connec-

tion. Steps to resolve this include:

Step 5: Close VCOM and test the MS860’s network

connection as follows:

Concrete walls, large metal objects, etc. can

impede the WiFi signal and should be ac-

counted for and avoided.

Set the MS860’s Power Saving mode to “off”.z

Disable the AP’s Power Saving option (if it has

one). Set the AP for maximum power usage

(if possible).

If the AP has an antenna, get it as high in the

air as possible.

Get closer to the Access Point.z

1 2 ... 89 90 91 92 93 94 95 96

Žádné komentáře

Unitech MS860 Uživatelský manuál Strana 94